Hello, welcome to the official website of Shenzhen Spacetek Technology Co., Ltd.

10/100Mbps Ethernet PoE Injector

PI100F

• Complies with IEEE 802.3af and IEEE 802.3at standards

• Delivers power up to 100 meters

• Auto-determine the necessary power requirements

• Install over-current protection circuit

• Plug-and-Play, no configuration required

Description
Specification

SyncNet 10/100Mbps PoE+ Injector, model PI100F, combines electrical power with a 10/100Mbps network connection to produce a 10/100Mbps PoE+ signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE and PoE+ devices. Connect the injector to a non-PoE 10/100Mbps switch and then run an Ethernet cable with data + power to network a PoE or PoE+ device up to 100 meters (328 ft.) away.

Standards	IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at
Device Interface	1 x Fast Ethernet port 1 x PoE+ Fast Ethernet port LED indicators Wall mount
Data Transfer Rate	Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Power	Input: 48 – 56 V DC Consumption: Max. 15/20/30 Watts
PoE	PoE budget: 30 Watts Pin 1,2 for power- and pin 3,6 for power+ (mode A)
Operating Temperature	0 - 50 °C (32 - 122 °F)
Operating Humidity	Max. 90% non-condensing
Dimensions	113.5(W) x 55.5(L) x 32.8(H)mm